EB2500 Magnetic bending machine

ALL PRODUCT

    Contact Us

    Thank you for your interest in our products, we will reply you in details asap.

    Features:

    1. Magnetic Bending Machine with Magnetic clamping brake

    2. Easy raise clamping car.

    3. Unlimited box depth.

    4. Include multiple finger lengths.

    5. Bending stop included.

    6. The fundamental principle of the Magnetic Bending Machine is that it uses electromagnetic, rather than mechanical, clamping system.

    7. The machine consists of a long electromagnet with a steel clamp bar located above it.

    8. The sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-10 tons.

    9. Rotating the bending beam then forms the bend.

    10. The sheet is bent around the front edge of the clamping bar.

    11. They have application in many ways with four various sets clamping bars.


    Specification:


    Item   No.373404373405373406
    ModelEB2000EB2500EB3200
    Max. bending length2000 mm / 6’2500 mm / 8’3200 mm / 10’
    Max.   thickness1.6   mm / 16Ga1.6   mm / 16Ga1.2   mm / 18Ga
    Clamping force9 Ton12 Ton10 Ton
    Duty   cycle30%30%30%
    Back gauge640 mm640 mm640 mm
    Foot   switchstandardstandardstandard
    Nominal current12 Amp15 Amp15 Amp
    ProtectionThermal cut-out 70°C
    Bending edge length2090 mm2590 mm3290 mm
    Distance   between lifters2028   mm2528   mm3228   mm
    Packing size220x112x38 cm270x112x38 cm370x112x38 cm
    N.W./G.W.259/350   kg290/403   kg381/507   kg



    Standard accessories:

    Standard full length clamping bar

    Foot switch


     

    Optional accessories:

    No.

    Related Products

    * Magnetic Bending Machine with Magnetic clamping brake
    * Easy raise clamping car.
    * Unlimited box depth.
    * Include multiple finger lengths.
    * Bending stop included.
    * The fundamental principle of the Magnetic Bending Machine is that it uses electromagnetic, rather than mechanical, clamping system.
    * The machine consists of a long electromagnet with a steel clamp bar located above it.
    * The sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-10 tons.
    * Rotating the bending beam then forms the bend.
    * The sheet is bent around the front edge of the clamping bar.
    * They have application in many ways with four various sets clamping bars.

    PRODUCT DETAILS